Top 7 Hot Tub Cover Lift Reviews 2020

Hot tub covers, especially hardcovers, are quite heavy and take a tremendous amount of energy to remove or put into place. You might find yourself alone trying to lift the cover, but you just can't because it's too heavy for you. That is where hot tub cover lifters come in.

Hot tub cover lifters are essential additions to your hot tub as they not only increase the longevity of your cover but also facilitate more comfortable covering and uncovering.

They come in many designs. Some are attached to the side of the tub cabinet and others underneath. Depending on where the cover rests when removed, they can give you varying degrees of privacy.

When it comes to lifters, you have a wide variety to choose from. You can choose from manual lifters that require you to do the actual lifting to hydraulic lifters that use hydraulics to lift the cover.

Benefits of using a Spa Cover Lifter

1. They make work easier

Hot tub covers weigh a lot, an average of approximately 40-50lbs. Lifting this much weight alone is hard and often requires at least two people to lift the cover. Using cover lifters simplifies this task tremendously and makes it a one-person job.

2. They protect you cover

Cover lifters attach firmly to both your hot tub and cover. When removing the cover, cover lifters fold the cover nicely, eliminating the possibility of tearing your cover when uncovering your hot tub.

3. Cover lifters minimize the risk of injury

Personal injuries, however minor, are a common occurrence when covering or uncovering hot tubs. Cover lifters reduce the risk of injury because you don't have to lift or drag the heavy cover to remove it.

4. Cover lifters are a solution to cover storage

Storing your heavy cover when not in use is problematic for most people. Cover lifters conveniently fold the cover on the side of your tub, thus eliminating the storage issue. Depending on the design of the cover, it can also provide extra privacy by creating a 'wall' on the side it folds.

5. Cover lifters act as safety features to your hot tub

Cover lifters are equipped with locking devices. Locking your hot tub helps in keeping your children or pets safe should they attempt to get into the hot tub while you are not there.

 

Types of Hot Tub Cover Lifters

1. Shelf style lifters

A shelf lifter is not technically a lifter but falls in the category of cover lifters. Its primary purpose is giving you a place to put your cover after uncovering your hot tub.

2. The Standard Tub Lifter

Standard cover lifters are fastened onto the side of your hot tub. You can mount it on a high, medium, or low position depending on how high you want the cover when the tub is open. They are instrumental when it comes to increasing your privacy.

They come in a variety of designs, but all require physical effort to open or close because they don't come equipped with hydraulic assist systems.

3. Undermount Spa Cover Lifters

Undermount lifters slide under your hot tub for support. They don't require any drilling into the tub walls; hence are suitable for curved cabinets, and cabinets with inset LED lighting.

They work by lifting the cover from the hot tub then storing it in an upright position. Since they don't come with hydraulic assist systems, their functionality also requires physical effort to lift or close the cover.

4. Hydraulic Cover Lifters

They come with hydraulic assist systems and are suitable for large hot tubs because of the weight of the cover. They work by utilizing dual gas shocks that provide extra torque to lift the cover.

Most hydraulic lifters store your cover in an upright position, thereby proving extra privacy by creating a 'wall' on the side they lift. You can also get one that folds your cover to the ground, thus providing a clear, unobstructed view of the surrounding.


Top 7 Hot Tub Cover Lifters - Reviews and Top Pick

Overview:

This cover lifter uses a manual pivot style mechanism to lift the hot tub cover and is mounted at ground level.


When using this cover, you can retain your unobstructed view because it can be folded down behind your hot tub. It is made of powder-coated rust-resistant stainless steel hence cannot get damaged by the moisture from your hot tub.


On the downside, it is designed for rectangular and square hot tubs. For it to fit in a hot tub, the tub must have a radius corner of up to 8 feet in width. Also, for it to fold over, it must have an allowance of four feet.

Pros

  • Affordable
  • Made of rust-resistant, durable steel
  • Easy to use
  • Comes with a one-year warranty

Cons

  • Can only be used in rectangular or square hot tubs
  • Its brackets require hot tubs with round corners to install properly

Overview:

This cover comes with an undermount base to facilitate easy installation. It is suitable for hot tubs and spas of different shapes. Its unique design enables it to be installed in round, rectangular, square, and octagonal hot tubs and spas.


With this lifter, removing your hot tub cover is quite easy because it is equipped with gas springs to provide extra torque. It requires at least 36" clearance to fold over the cover. The height of the cover, when open, can be adjusted from 30-40" depending on the height of your hot tub.


Despite its high cost, this universal cover lifter is an excellent addition to your hot tub.

Pros

  • Its unique design enables it to be compatible with hot tubs of all shapes
  • Quite easy to install
  • Made of high-grade corrosion-resistant aluminum
  • Comes with a five-year warranty

Cons

  • Quite expensive

Overview:

The Covermate conveniently lifts and stores your cover. It is compatible with all straight-sided hot tubs. It is also quite easy to install.


This lifter provides added privacy features with its side spa cover holder. It also has an effortless mode of operation hence cannot cause you headaches when using it.


On the downside, it does not work well without its mounting brackets.

Pros

  • Has good privacy features
  • Compatible with hot tubs with widths of up to 96".
  • Comes with web nylon straps for extra support
  • Made of rust-resistant, powder-coated aluminum
  • Come with TowelMate for hanging your towels

Cons

  • Not compatible with round hot tubs
  • Can only work with rear-mounted brackets

Overview:

It comes in a stylish look with gas springs to facilitate effortless opening and closing. Its elegant design enables you to fit it in almost any backyard environment.


For hot tubs of up to 7.5", it comes with a safety locking feature that holds the cover-up till it's time to be closed. It comes with a durable powder coat Finnish and stainless steel hardware.

Pros

  • Provides an effortless lifting experience
  • Its stylish design enables it to fit in any backyard style

Cons

  • Its safety locking feature is only available for hot tubs of up to 7.5."

Overview:

This is a bottom-mounted lifter made from aluminum with a powdered coat Finnish. It can handle covers of up to 99". It operates by a pivot style assist mechanism. Also, its compact size facilitates easy storage.


This lifter is affordable and very durable. On the downside, it cannot fit on round hot tubs. Also, its instruction manual is not easy to understand; hence it might prove problematic during installation.

Pros

  • Easy to install
  • Comes with a long-lasting cover

Cons

  • Cannot be installed on in-ground or sunken hot tubs
  • Can only be installed on rectangular and square hot tubs

Overview:

The Spa Escort Cover is built to last. Made from quality materials, including powder coated steel and aluminium components, this cover lifter won't let you down.


Easy installation with only five parts. Compatible for spas up 96" wide.


Pros

  • Quality manufactured
  • Quick and easy to set up
  • Perfect for harsh environments

Cons

  • None

Overview:

This lifter is rated among the best due to its strength and versatility. It can be installed on hot tubs of almost any shape. It fits on octagonal, round, square, oval, and rectangular hot tubs.


You can adjust its width and height through its tubing. It is conveniently designed to facilitate easy cover removal and replacement. It is also very durable owing to its powder-coated-corrosion-resistant metal tubing.

Pros

  • Easy to assemble and operate
  • Suitable for heavy-duty lifting
  • Made of durable, corrosion-resistant metal
  • Adjustable width and height
  • Can fit on hot tubs of any shape

Cons

  • Installation requires drilling of 18 holes in the hot tub walls 

Tips and buying guide to determine the best cover lifter

1. Space

The first thing you need to consider when buying a cover lifter is the space around your hot tub. Some cover lifters require more space than others to fold, so you should note the distance between your hot tub and any obstacle.

2. The shape and size of your hot tub

Most cover lifters are limited to work on specific shapes of hot tubs. Most lifters are not adjustable and can only be fitted on hot tubs with a particular range of dimensions.

3. The type of mount you need

This depends on how your hot tub is installed, whether deck, patio, in-ground, or stand-alone. The type of mount you use also depends on the amount of clearance around your hot tub.

Frequently asked questions (FAQs)

Question: why is my hot tub cover lifter becoming heavier?
Answer: The foam in hot tub cover absorbs water vapor; hence its weight increases. It keeps getting more substantial as it absorbs more water, and it might reach a point where you are no longer able to lift it.

Question: How much room is needed to install a hot tub cover lifter?
Answer: Most cover lifters require a clearance of at least 18" of space behind the tub and a few inches on the sides to accommodate the lifter's arm. You will also require some space around the tab for cleaning and moving around.

Question: Why should I purchase a cover lifter?
Answer: Cover lifters are essential in facilitating the folding or closing of hot tub covers. They lessen the effort it takes to lift your hot tub cover, therefore, making you enjoy your hot tub experience even more.

Question: How do hot tub lifters work?
Answer: Hot tub cover lifters work by the use of a bar resting against the fold in the cover. After you unclip the safety locks at the front of the cover, you fold it back over the bar. When you fold it back again, it is mechanically brought back from the hot tub surface and held in place. Using a cover lifter is quite easy, and you can do it in seconds, all by yourself.

Conclusion

Cover lifters not only simplify the use of your spa but also protect your cover. A long-lasting and undamaged cover enables you to save the money you would have spent buying a new one. You also get to enjoy your hot tub more because it significantly reduces the hustle involved in opening and closing the heavy hot tub covers by hand.

This article has provided you with an in-depth knowledge of cover lifters. From the way they work, types, and even a review of the bet cover lifters on the market. The next time you go shopping, try to remember all this because if you do, I guarantee you'll walk away with the best product. You might even land a terrific deal when negotiating with the salesman/woman since you already know a lot!